DIGITAL ALLTEK WL50 Manual de instalación e inicio rápido - Página 4
Navegue en línea o descargue pdf Manual de instalación e inicio rápido para Adaptador DIGITAL ALLTEK WL50. DIGITAL ALLTEK WL50 7 páginas. Wireless adaptor/antenna
Imprimir páginaWL50 Quick Start Guide
DIGITAL ALLTEK
3. Driver/Software Installation
It is very important that you do not plug the WL50 in to a USB port of your computer unless you the WL50 Drivers CD-
ROM close to hand. By plugging in the WL50 you will initiate the Windows "Found New Hardware Wizard" which will not
be able to complete correctly without the Driver CD-ROM being present. The installation process varies depending upon
which Operating System your computer has, so please ensure that you follow the correct procedure.
Installation for Windows XP
Insert the WL50 Drivers CD-ROM in to your Windows PC. After the
CD-ROM has been detected by Windows, plug in the WL50 in to a
spare USB port.
After a few seconds, Windows should detect the WL50 and display the
Found New Hardware Wizard (see Fig 1).
Windows is asking if you wish to search for the driver on-line using
Windows Updater. Click on the "No, not at this time" option and then
click the "Next" button.
Figure 1
Windows will now ask you if you want to install the software automatically (see Fig 2). Click on the "Install from a list or
specific location (Advanced)" option and then click the "Next" button.
Figure 3
Figure 2
You will now be asked where you want to search for the software (see Fig 3).Click on the "Include this location in the
search;" option and then click on the "Browse" button .
You will be presented with the normal Windows Browse window (see
Fig 4). Scroll down the list of locations until you see the "My
Computer" option, double click on this and you should see the CD-
ROM location appear. Double click on this and then double click on
the "Drivers" folder and then click on the "Windows_XP" folder, at
which point the "OK" button, which was greyed out should now be
active. Click on the "OK" button.
Figure 4