Shimano 105 FC-R7000 Manual del Concesionario - Página 20
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano 105 FC-R7000. Shimano 105 FC-R7000 21 páginas. Front chainwheel
También para Shimano 105 FC-R7000: Manual del Concesionario (21 páginas)
Imprimir página
MAINTENANCE
Replacing chainrings
MAINTENANCE
Replacing chainrings
• Gear shifting performance will be reduced if the installation positions of the chainrings are incorrect. Be sure to install the chainrings in the
correct positions.
• Use the correct combination of genuine Shimano bolts, chainrings and crank arm, otherwise the large chainring may become damaged by the
bolts.
Outer side
With the marked side of the largest chainring facing outward, set the largest chainring so
that the chain drop prevention pin is positioned under the crank arm.
(A)
(C)
Inner side
With the marked side of the smallest chainring facing inward, set the smallest chainring so
that the Δ mark or the convex section is positioned under the crank arm.
FC-R9100
(A)
(C)
(D)
(B)
NOTE
(B)
FC-R8000/FC-R7000
(B)
20
(A)
Marking
(B)
Crank arm
(C)
Chain drop prevention pin
(A)
Marking
(B)
Crank arm
(C)
Δ mark
(D)
Convex section
Tightening torque
12 - 16 N·m