Shimano 105 FC-R7000 Manual del Concesionario - Página 18
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano 105 FC-R7000. Shimano 105 FC-R7000 21 páginas. Front chainwheel
También para Shimano 105 FC-R7000: Manual del Concesionario (21 páginas)
Imprimir página
INSTALLATION
Installation of the crank
(C)
(z)
(A)
4
(B)
Push in the stopper plate and check that
the plate pin is securely in place, and
then tighten the screws of the left crank
arm.
Tighten both screws equally to the
specified tightening torque (12 - 14 N·m).
(z)
The illustration is of the left crank
arm (cross-section)
18
(A)
Plate pin
(B)
Stopper plate
(C)
Left crank arm
Tightening torque
12 - 14 N·m
NOTICE
•
The two screws should be tightened
alternately in stages rather than each screw
being fully tightened at once.
•
Set the stopper plate in the correct
direction as shown in illustration.