Shimano Alfine S7000 Series Manual del Concesionario - Página 31
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano Alfine S7000 Series. Shimano Alfine S7000 Series 47 páginas.
Imprimir página
- 1. Installation of the Cs-S500 Sprocket with Chain Guard
- 2. Installation of the Shifting Lever
- 3. Installation of the Shifting Cable
- 4. Adjusting the Cassette Joint
- 5. Replacement and Assembly of the Indicator Unit
- 6. For Internal 8-Speed (Oil Maintenance Kit: Y00298010)
- 7. In the Case of 11-Speed Internal Geared Hub (Oil Maintenance Kit: Y13098023)
ADJUSTMENT
Adjusting the cassette joint
ADJUSTMENT
Adjusting the cassette joint
For internal 8-speed
1
(B)
To be continued on next page
Change the shifting lever setting from 8
to 4 .
Check to be sure that the yellow setting
lines on the cassette joint bracket and
pulley are aligned at this time.
If the yellow setting lines are not
aligned, turn the cable adjustment barrel
of the shifting lever to align the setting
lines.
After this, move the shifting lever once
more from 4 to 8 and then back to 4 ,
and then re-check to be sure that the
yellow setting lines are aligned.
(A)
31
(A)
Yellow setting lines
(B)
Cable adjustment barrel
TECH TIPS
•
The yellow setting lines on the cassette
joint are located in two places. Use the one
that is easiest to see.
< When bicycle is standing up >
Should be aligned
Pulley
Bracket
< When bicycle is upside down >
Pulley
Should be aligned
Bracket