Shimano BL-T8000 Manual del Concesionario - Página 34
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano BL-T8000. Shimano BL-T8000 39 páginas. Hydraulic disc brake
Imprimir página
MAINTENANCE
Replacing the brake hose
(A)
(B) (C)
(y)
(z)
3
(A) (C)
4
To be continued on next page
(D)
(E)
(C)
(C)
(A)
(z)
(B)
(D)
(E)
Pass the brake hose through the
connecting bolt and olive, as shown in
the illustration.
(y)
Direction of insertion
(z)
Grease the outside of the olive.
Use a tapered tool to smooth out the
inside of the cut end of the brake hose,
and mount the connector insert.
Connect the brake hose to TL-BH61 and
secure TL-BH61 in a vise, as shown in the
illustration.
Then, hammer down the connector
insert until the connector insert mount
comes into contact with the end of the
brake hose.
(z)
SM-BH59-JK-SS/SM-BH90-SS: 1mm
34
(A)
Brake hose
(B)
Connecting bolt
(C)
Olive
(D)
Cut end
(E)
Grease
NOTE
For installation to the built-in type frame, first
connect to the frame caliper the end of the
brake hose to which the banjo is not
attached.
(A)
Brake hose
(B)
Olive
(C)
Connector insert
(D)
TL-BH61
(E)
Vise
NOTE
If the end of the brake hose is not in contact
with the connector insert mount, the brake
hose may be disconnected or cause fluid leaks.