Shimano BR-C3010 Manual del Concesionario - Página 21
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano BR-C3010. Shimano BR-C3010 27 páginas. Hub roller brake
Imprimir página
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. Installation
- 3. List of Tools to be Used
- 3. Installation of the Lever
- 3. Installing the INTER M Brake to the Hub Body
- 3. Installation of the Hub to the Frame
- 3. Installation of the Brake Cable
- 4. Adjustment
- 4. Adjusting the Brake Cable
- 5. Maintenance
- 5. Applying Grease
INSTALLATION
Installation of the brake cable
<For BR-IM31/35>
1
(D)
2
3
2
(A)
(a)
(B)
(C)
(b)
(D)
3
1
(E)
(c)
Place the cable adjustment barrel (A)
so that it is (a) 13 to 15 mm from the
end of the outer casing holder (B), and
then pass the inner cable through the
cable adjustment barrel and then
through the hole (C) in the inner
mounting bolt.
Check that both ends (b) of the outer
casing are securely inserted into the
cable adjustment barrels (D) of both
the brake lever and brake arm.
Push the link back until it stops. Then,
while pulling the inner cable to apply
the full amount of tension to the
cable, tighten the inner cable fixing
nut (E).
21
(A)
Cable adjustment barrel
(B)
Outer casing holder
(C)
Hole in the inner cable fixing bolt
(D)
Cable adjustment barrel
(E)
Inner cable fixing nut
Tightening torque
6 - 8 N·m
NOTE
The inner cable has to be set so that it
passes under the link, as shown in the
illustration (c).