Shimano BR-M6000 Manual del Concesionario - Página 20
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano BR-M6000. Shimano BR-M6000 39 páginas. Hydraulic disc brake
También para Shimano BR-M6000: Manual del Concesionario (39 páginas)
Imprimir página
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
5
The level of liquid inside the funnel will drop at this time, so keep filling the funnel with oil
to maintain the level of liquid so that air is not drawn in (air does not get inside).
6
7
To be continued on next page
Set a 7mm socket wrench in place as
shown in the illustration, and then
attach the bag to the tube.
(A)
Connect the tube to the bleed nipple
and loosen the bleed nipple.
After a little while, the oil and air
bubbles will flow naturally from the
bleed nipple into the tube.
(z)
This way it will be possible to easily
extract the greater part of the air
bubbles remaining inside the brake
(B)
system.
Once no more air bubbles come from the
(A)
(B)
bleed nipple, temporarily close the bleed
nipple.
(z)
Air bubbles
20
(A)
7mm socket wrench
(B)
Bag
TECH TIPS
It may help to shake the hose gently or to tap
the reservoir tank or caliper gently with a
screwdriver or move the position of the
caliper at this time.
(A)
Bleed nipple
(B)
7mm socket wrench