Shimano Dura-Ace SL-BS78 Instrucciones de servicio - Página 2
Navegue en línea o descargue pdf Instrucciones de servicio para Accesorios para bicicletas Shimano Dura-Ace SL-BS78. Shimano Dura-Ace SL-BS78 2 páginas. Bar end shifter lever
Imprimir página
3.
Install the lever to the body unit.
Tightening torque:
2.5 – 3 Nm {21 – 26 in. lbs.}
M 5
Lever grip
Align the
SIS mark and the red
mark, and then set so that the
lever grip faces downward.
4.
Install the outer casing stopper to the brazed-on boss.
Brazed-on boss (M5)
Outer casing stopper (SM-CS50)
Tightening torque:
1.5 – 2 Nm {13 – 17 in. lbs.}
5.
Set so that the
projection
faces
downward.
6.
SIS operation
Turn the ring to select either SIS or friction.
Turn the ring until the red
the
Stopper fixing bolt
These service instructions are printed on recycled paper.
Please note: Specifications are subject to change for improvement without
notice. (English)
3 mm Allen key
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan
C
Jul. 2003 by Shimano Inc. PIT. SZK. Printed in Japan
With the outer casing placed along the handlebar, cover
the outer casing with the outer casing guide, and then
use tape or similar material to provisionally attach it to
the handlebar.
Outer casing guide
Tape
Wrap the handlebar with bar tape.
mark is correctly aligned with
SIS or FRIC
mark.
SIS
After making a selection, be sure to fold the ring
downward.
OK
Not OK
®
Friction
t