Shimano MTB SHADOW RD-M640 Manual del Concesionario - Página 6
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano MTB SHADOW RD-M640. Shimano MTB SHADOW RD-M640 27 páginas.
Imprimir página
INSTALLATION
List of tools to be used
The following tools are needed to assemble this product.
Where to use
Bracket axle
Mode converter
End adjust bolt
Bump stopper
Plate stopper pin
Plate unit cover bolt
Plate axle
Guide pulley/Tension pulley
Top/Low adjustment screw
Move the lever switch to the OFF position before installing the SHADOW RD+.
Refer to "REAR DERAILLEUR FOR MTB/TREKKING" in the General Operations for installation to the frame.
Direct mount
Note:
Direct mount rear derailleurs can only be mounted on direct-mount compatible frames.
The E-ring is not
necessary for installation.
Tool
5 mm Allen key
2 mm Allen key (RD-M820)
Screwdriver #2
3 mm Allen key (RD-M820)
3 mm Allen key
1.5 mm Allen key
Screwdriver #2
2 mm Allen key
4 mm Allen key
3 mm Allen key
Screwdriver #2
ON
Lever switch
6
OFF
5 mm Allen key
Tightening torque:
8.0 - 10.0 N·m {70 - 87 in. lbs.}