Shimano TIAGRA BR-4400 Instrucciones de servicio

Navegue en línea o descargue pdf Instrucciones de servicio para Accesorios para bicicletas Shimano TIAGRA BR-4400. Shimano TIAGRA BR-4400 3 páginas. Caliper brake

Imprimir página

WARNING

It is important to completely understand the

operation of your bicycle's brake system.

Improper use of your bicycle's brake system may

result in a loss of control or an accident, which

could lead to severe injury. Because each bicycle

may handle differently, be sure to learn the

proper braking technique (including brake lever

pressure and bicycle control characteristics) and

operation of your bicycle. This can be done by

consulting your professional bicycle dealer and

the bicycle's owners manual, and by practicing

your riding and braking technique.

Securely tighten the caliper brake mounting nuts

to the specified tightening torque.

Use lock nuts with nylon inserts (self-locking

nuts) for nut-type brakes.

For sunken nut type brakes, use sunken nuts of

the appropriate length which can be turned six

times or more; when re-installing, apply sealant

(locking adhesive) to the nut threads.

If the nuts become loose and the brakes fall off,

they may get caught up in the bicycle and the

bicycle may fall over. Particularly if this happens

with the front wheel, the bicycle may be thrown

forward and serious injury could result.

Obtain, read and carefully service instructions

when installing parts. A loose, worn, or damaged

parts may cause injury to the rider.

We strongly recommend that only genuine

Shimano replacement parts be used.

SERVICE INSTRUCTIONS

BR-4400

Before use‚ read these instructions carefully‚ and follow them for

correct use.

In order to realize the best performance, we recommend that

the folowing combination be used.

Series

Brake lever

Caliper Brake

Brake cable

SI-8BY0A

Caliper Brake

TIAGRA

ST-4400 / BL-R400

BR-4400

Installation of the brake lever

Tightening torque:

6 – 8 Nm

{52 – 69 in. lbs.}

Cable hook

Outer casing

Installation bolt

Cable hook

Checking the

outer casing

Check to be sure

that the outer

casing has been

completely and

correctly

inserted.

5 mm Allen key

Inner cable end