Shimano STEPS E6000 Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Bicicleta Shimano STEPS E6000. Shimano STEPS E6000 46 páginas. Shimano steps e6000 battery and charger
Imprimir página
DANGER
Only use original replacement parts. Replacement parts from other
manufacturers can impair the function of your pedelec. Serious acci-
dents can result.
Ask your cycle dealer to show you how to use, and explain, the
special features of the components. Please also follow the component
guides. We recommend asking your cycle dealer to assemble and
adjust the bike. Otherwise, components could become loose due
to a faulty assembly. If this happens whilst you are cycling, you
could injure yourself very seriously or even die. If you do have to
tighten something yourself, a full list of torque settings is in Section
8. Torque settings Page EN-46
requirement).
WARNING
Do not ride in unfavourable lighting conditions (fog, rain, dusk,
darkness) without adequate lights IV.II.I Lights Page
to do so can result in accidents and serious injuries.
Always remove the battery before starting to work on the pedelec.
The pedelec could switch on unexpectedly and you could be seriously
injured.
EN-12
Original User Guide | Pedelec Shimano Steps E6000 Version 1
(strict adherence to which is a
EN-8. Failure
CAUTION
Do not open up the motor, display, battery or charger as you could
injure yourself. Parts might also be damaged beyond repair,
invalidating the warranty. Contact your cycle dealer when problems
arise.
IMPORTANT
Always park your pedelec so that it cannot tip over. Components can
be damaged if the bike tips over. If your bike is not equipped with
a kick stand, one can be fitted if required. Please contact your cycle
dealer.
Do not clean the pedelec with a water hose or high pressure washer.
Although the components are sealed, damage to the cycle may still
result. Clean the pedelec with a soft damp cloth.