Shimano SG-8C20 Manual de servicio - Página 27
Navegue en línea o descargue pdf Manual de servicio para Equipamiento industrial Shimano SG-8C20. Shimano SG-8C20 36 páginas. Inter-8 coaster hub
También para Shimano SG-8C20: Instrucciones de servicio técnico (4 páginas)
Imprimir página
18.
Place the brake arm unit
onto the hub axle and turn it
to the left and right so that
the serrations of the brake
shoe and brake arm unit
engage with each other.
Then push the brake arm
unit fully into the brake shoe
unit.
Note:
Apply a liberal coating of internal
hub grease to the inside and out-
side of the brake shoe unit.
19.
Screw the stop nut to adjust
so that the hub shell can be
turned smoothly without
any play. After adjusting,
secure the stop nut with the
locknut.
20.
Install the dust cap.
(Y-041020800)
This completes the assembly of
the INTER-8 coaster hub.
Brake arm unit (Y-35P 98080)
Brake shoe unit (Y-35 98020)
(Y-041020800)
TL-7S20
Locknut 17mm (Y-35P 28000)
ok
Stop nut 22mm
(Back side)
(Y-35P 22000)
Serrations
27