Digital Audio Labs LIVEMIX MIX-16 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Mezclador Digital Audio Labs LIVEMIX MIX-16. Digital Audio Labs LIVEMIX MIX-16 15 páginas. Central mixer and power distributor
También para Digital Audio Labs LIVEMIX MIX-16: Manual del usuario (15 páginas)

Imprimir página

1. Setup and Operation

MIX-16/MIX-32 FIRMWARE UPDATE INSTRUCTIONS

The MIX-16/MIX-32 can be updated with a CS-SOLO/CS-DUO

or a PC application.

You can update with a CS-SOLO or CS-DUO if:

• The MIX-16/MIX-32 serial number is greater than

12-02-01030

• The MIX-16/MIX-32 firmware is 1.01 or above

• The CS-SOLO/CS-DUO firmware is 1.31 or above

If your MIX-16/MIX-32 does not meet the criteria above, update with a Windows PC application.

In most cases, this will bring your MIX-16/MIX-32 up to date and subsequent updates can be

performed with the CS-SOLO/CS-DUO. For reference, both methods are listed below.

UPDATE FIRMWARE OF MIX-16/MIX-32 WITH THE PC APPLICATION:

1. Update all CS-SOLOs and CS-DUOs to the latest version per the instructions above.

2. Download the MIX-16/MIX-32 Update Application from

3. Connect the USB port on the MIX-16/MIX-32 to a Windows computer.

4. Wait for MIX-16/MIX-32 drivers to fully install.

5. Run MIX-16/MIX-32 Update Application. A second set of drivers will be installed at the start

of this process and may take a few minutes. Once the updater has started, a progress bar will

appear. Do not turn off the power until the update is complete or you may damage the unit.

6. PRESS Finish.

7. Disconnect the MIX-16/MIX-32 from the PC and verify the update was successful by checking

the firmware version with the CS-SOLO/CS-DUO.

UPDATE MIX-16/MIX-32 FIRMWARE WITH A CS-SOLO OR CS-DUO:

1. Download the latest firmware: http://www.digitalaudio.com/support.

2. Unzip the firmware zip file and copy the LMUPDATE folder to the

root directory of a USB flash drive (FAT Format). Please verify the

LMUPDATE folder is not in another folder.

3. Go to Livemix Version Info by pressing Mix Tools, Global

Configuration and then Livemix Version Info.

4. PRESS Update MIX-16/MIX-32 Firmware.

5. PRESS Yes to update, or No to cancel.

6. Insert USB flash drive containing the update, when prompted. PRESS

Continue or Exit to cancel. Once the update has begun, do not turn

off the power to the MIX-16/MIX-32 or you may damage the unit.

LIVEMIX MIX-16/32

http://www.digitalaudio.com/support.

NOTE:

If updating with the

CS-SOLO or CS-DUO

does not work, please

use the PC Application.

Some updates take a

while to complete. If

updating the MIX-16/

MIX-32 from the

CS-SOLO/CS-DUO, it

works best to have only

one personal mixer

connected.