Crestron 4 Series Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Sistemas de control Crestron 4 Series. Crestron 4 Series 12 páginas. Control processor for zūm lighting control system
También para Crestron 4 Series: Manual de inicio rápido (8 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (6 páginas), Inicio rápido (5 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Primeros pasos (2 páginas), Manual de inicio rápido (2 páginas)

ZUM-HUB4

4-Series™ Control Processor for Zūm® Lighting Control System

Zūm Wired Setup

Once all of the devices are installed in the space and using the latest

firmware, use the Zūm app to modify default room behavior. Expedite

commissioning by copying a room configuration and sending it to a room

with identical devices. Save a room configuration template and share it

via email, or other methods available on the device. A template can be

deployed to any identical room via the Zūm app or the ZUM-HUB4.

NOTE: The ZUMLINK-KP Bluetooth® connection is required to

configure a Zūm wired space with the Zūm app.

Connect to the Zūm App

Download the Zūm app from the

Apple® App Store®

online store.

To use the Zūm app:

1. Enable Bluetooth wireless connection on your device to communicate

with the Zūm space.

Google Play™

online store or the

2. Launch the Zūm app and grant the permissions the app requests. The

Zūm app displays a list of available spaces.

3. If new firmware is detected, update the firmware. Refer to

Firmware for a Zūm

Space.

4. Select the desired space.

5. When prompted, enter the PIN. The Zūm app main screen opens.

NOTES:

For Primary load controllers running firmware 3.6.18 and higher,

the default PIN is 246800. For firmware lower than 3.6.18, the

default PIN is 2468.

To change the PIN, navigate to the Room Settings. When

changing the PIN, the previous PIN is required.

The first failed log-in attempt locks the user out of the Zūm

space. With subsequent failed attempts, the lockout duration

increases up to 60 minutes.

The lockout duration resets when the correct PIN is entered, the

Primary load controller reboots, or when the PIN is changed from

the ZUM-HUB4 Web-Interface.

Quick Start

Update