Digital Barriers EDGEVIS VIDEO ROUTER 4 Manual de instalación del hardware - Página 11
Navegue en línea o descargue pdf Manual de instalación del hardware para Enrutador de red Digital Barriers EDGEVIS VIDEO ROUTER 4. Digital Barriers EDGEVIS VIDEO ROUTER 4 16 páginas.
Imprimir página
EDGEVIS VIDEO ROUTER HARDWARE INSTALLATION
Appendix A - Troubleshooting and FAQ
How many channels does the EdgeVis Video Router support?
The EdgeVis Video Router can record up to 16 cameras and transmit 4 of those cameras. It is possible to create
multiple quad-views allowing 16 cameras to be transmitted simultaneously.
What level of recording and streaming performance is achievable?
Based on the processing power of the EdgeVis Video Router, the unit can achieve 16 channels of up to 30 fps of
1080p quality recording whilst simultaneously streaming four 1080p video streams at 25/30fps.
What recording functions does the EdgeVis Video Router support?
The EdgeVis Video Router can be set up to record continuously, or to record on an alarm trigger. Recordings can be set
to overwrite old recordings automatically, or to stop on full.
What indicative recording times and streaming rates are achievable?
The EdgeVis Video Router records the incoming video stream from IP cameras without modification. By default,
cameras are automatically configured by the encoder to 1080p @ 25/30fps at a bitrate of 10 Mbps when added to an
encoder. This will provide approximately 8 days recordings at a very high quality (multiple cameras will proportionally
reduce this duration) on the supplied 1TB drive option.
After adding the camera, and by using the camera's own configuration interface, the user is usually able to manually
configure lower quality setting on their IP cameras to extend the duration of recordings if necessary. This table
provides an indication of the potential increase in duration possible:
720p cameras are approximately half of the resolution of 1080p (and standard definition cameras are approximately ¼
of the resolution of 1080p) and as such will use proportionally less data.
What bearers can the EdgeVis Video Router use to transmit video to
EdgeVis Server?
The EdgeVis Video Router can use the internal cellular modem for efficient streaming over commercially available
cellular networks, its built in LAN or Wi-Fi connection for use with broadband connections. EdgeVis optimises its
transmission to the characteristics of the bearer that is being used to maximise performance.
ISSUED: 29 NOVEMBER 2022
Frame rate
IP Camera b/w
1 fps
1.4 Mbps
6.25 fps
3 Mbps
12.5 fps
5 Mbps
25 fps
7 Mbps
1TB SDD
64 days
32 days
16 days
12 days
PAGE 11