Accutone A20 OMEGA Manual del usuario y manual de instalación - Página 8

Navegue en línea o descargue pdf Manual del usuario y manual de instalación para Amplificador Accutone A20 OMEGA. Accutone A20 OMEGA 12 páginas. Telephone & multimedia amplifier

Imprimir página

How do I use this device? What can I do with it?

B.1.5 Pairing the Amplifier to your Telephone

B.1.5.1 Telephone Configuration Switch

Different telephones have a different pin configuration, users have to pair

the amplifier to the telephone model before it can operate effectively. The

Telephone Configuration Switch (7) at the side panel allows you to select

the proper setting so that the unit will work with your telephone base unit.

The switch has 6 positions, which are (1 - 2 - 3 - 4 - 5 - 6).

Wear the headset over your head and switch the Headset/Handset

Application Switch (17) to the Headset position. Make sure to turn down

the volume adjustment to protect your ear. Now select in turn the 6-

position Configuration switch one by one until you can hear a clear dial tone.

If you receive a clear dial tone sound, then the receiving connection is

working. Note that there may be 2 matching settings, choose the clearer

setting or either one if both perform the same. There is at least one setting

which matches your telephone.

After pairing the receiving (speaker/incoming) connection, in some

telephones you will have to select the transmitting (microphone/outgoing)

connection as well.

operating the unit.

B.1

part b. begin to operate.

operating the unit.

B.1

B.1.5.2 Transmission/Microphone Connection Pairing

The Microphone Selector (6) at the back of the Series A20 Omega

amplifier allows you to select the proper setting so that the other end can

hear your voice clearly. The switch has 4 positions, which are (1-2-3-4). Do

not alter the Telephone Configuration Switch (7) after you have

completed the previous step. This step only configures the microphone

connection.

Caution: Make sure you turn down the microphone volume (10) before each trial,

because different microphone settings varies greatly in sensitivity, if the

microphone volume is set too high when switched to a sensitive setting, the

speaker may SQUEAL, which can cause damage to the user's ear and the unit.

Dial a telephone number. If the person on the other side cannot hear your

voice, then select the Microphone Selector (6) one by one until the

person can hear your voice clearly. Repeat this step if necessary.

If your telephone specifies the type of microphone it is using, then you can

simply choose from the chart below the correct type of microphone

according to the positions of the Microphone Selector (6):

1 =

Ceramic Microphone

2 = Electret Condenser Microphone (the most frequently used)

3 = Dynamic Microphone (low sensitivity level)

4 = Carbon Microphone (high sensitivity level)

part b. begin to operate.

How do I use this device? What can I do with it?

1 2 3 4