Digital Check TellerScan 230 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Escáner Digital Check TellerScan 230. Digital Check TellerScan 230 19 páginas. Countertop check scanners

Imprimir página

TellerScan 215 & 230 User Manual Rev 050609

Getting Started with the TellerScan® 215 & 230

How to Load Checks

TS215 – Checks are placed into the scanner one item at a time.

1. Place the item into the entry tray with the

face of the document toward the outside.

2. Then slide the document into the path

until the leading edge contacts the 1

3. If the application is set to scan, it will start

the motor and grab the document.

TS230 – The automatic-feeder can hold up to 50 items. Use the following directions:

1. Remove all rubber bands, staples,

paper clips, pins, etc.

2. Load the items into the automatic-

feeder with the front of the items

facing away from the scanner (Fig 8).

NOTE: Checks must be jogged properly

in order to feed correctly. The bottom and

left leading edges of the check stack

must align with one another (See Fig. 7).

3. Slide the items into the automatic-

feeder until the left LED light

illuminates (Fig. 10).

4. This indicates the scanner is ready to

begin feeding the items.

force the items into the automatic-

feeder after the light illuminates, as

this may increase jam rates.

LED Status Indicators

Fig. 9: The right LED

comes on 'Red' to

indicate power to the

unit.

roller.

DO NOT

Fig. 10: When the

scanner is acquired by

the application, the right

LED turns green.

Fig. 7: bottom & left

edges aligned

Fig. 8: Front of

checks are facing out

The left LED is the

document in pocket

indicator after

acquisition.