Accutone VEGA Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Auriculares Accutone VEGA. Accutone VEGA 6 páginas. True wireless bluetooth earbuds

Imprimir página

charging the batteries

(1) VEGA doesn't come fully charged,

so please charge before first use.

(2) With the LED-indicators pointing

up and earbuds pointing inward,

place the earphones inside the

charging cradle.

(3) A full charge usually takes

about 2 hours. LED-indicators

turn red during charge, and

turn off when it is fully charged.

(4) The charging cradle's indicator

turns blue when it is charging the

headphone. It also turns off when

fully charged.

(5) The charging cradle comes with

its own battery, allowing headphone

charging on the go. The cradle also

requires charging.

(6) Connect micro-USB cable* to its

port, the indicator turns red during

charge and turns off when complete.

*Only use the supplied cable for charging.

headphone status

headphone LED STATUS INDICATORs

low battery

flashes red 3 times every minute

charging

indicator lights up solid red

fully charged

indicator turns off

cradle status

charging cradle LED STATUS INDICATORs

charging vega

Indicator lights up blue

being charged

indicator lights up red

Fully charged

indicator turns off

pairing vega to a device

(1) Make sure both earphones are

turned off (no LED lights)

(2) Press and Hold the MFB

Multifunction Button for 8

seconds, until indicators flash

blue and red very quickly.

(3) Left and Right earphones will pair with each other within 10

seconds, wait until one earphone's light turns off, indicating Left and

Right are paired as one unit.

(4) Enter Bluetooth searching mode on your device. Find "Accutone

VEGA" from list and connect. Enter "0000" if pin is required. Indicators

will only flash blue once the pairing is successful.