DIGITAL DELAY 1014-SCR Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios para automóviles DIGITAL DELAY 1014-SCR. DIGITAL DELAY 1014-SCR 11 páginas.

There are two displays, A and B, that are used to show all relative information about the

Crossover Plus with 4-Stage Timer. Each display can display up to six different times or mode settings.

Display A:

The six shown on Display A are Your Time, Delay 1 Time,

Number of Bumps, P.B. mode, Stage 1 Time, and Stage 3 Time.

Display B:

The six shown on Display B are Their Time, Delay 2 Time,

How Late Time, Throttle Mode, Stage 2 Time, and Stage 4 Time.

There are six red L.E.D.s to the right of the key pad. The information being displayed

corresponds to the text that is to the right of the lit L.E.D.. For example if the L.E.D. next to the text

"Dial-Ins" was lit, Display A would be showing Your Time and Display B would be showing Their Time.

Other special functions of the displays are:

Low voltage indication:

indicating the voltage to the unit is below the recommended 11.5

Volts.

Transbrake-Colons:

turn on and when the delay timer starts counting down both colons

will flash.

Stage Time-Arrows:

arrows will turn on. When stages 3 and 4 are being displayed both

arrows will flash. If stage 1 or 2 is counting down, the arrow for

that stage will turn on. If stage 3 or 4 is counting down, the arrow

for that stage will flash.

Bump Arrow:

the arrow in Display A is on, the unit is set in bump up mode. If

there is no arrow the unit is in bump down mode.

The Displays

The numbers on both displays will flash

When the transbrake is engaged both colons will

When stages 1 and 2 are being displayed both

When the Bump information is being displayed and