Bitron AV1407/7 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de interfono Bitron AV1407/7. Bitron AV1407/7 14 páginas. T-line b-twin series

Imprimir página

'c2'

•

Hook up the handset of indoor station C1. It will beep to indicate exit from programming mode.

•

Check programmed function: pick up the handset C1 and press the programmed button. Check that the

indoor station C2 rings and check audio.

•

You will need to program indoor station C2 to call C1 to make the opposite call possible.

The other functions listed in the "Button functions" table will not be lost if the buttons are programmed

for this function because the intercom call is made with the handset off-hook.

DOOR PHONE CALL TONE

Five tones can be selected on B-Twin system indoor stations. The tones can be programmed also by the end

user by following the simple sequence below.

•

Hold the door opener button pressed. Press and release the button

•

Hold the door opener button pressed and press the button

•

Release the door opener button when you have chosen the tone you want. The tone is now programmed.

FLOOR CALL TONE

Programming is possible only on door phones equipped with key add-on AV1407/051.

Five ﬂ oor call tones can be selected on B-Twin system indoor stations. The tones can be programmed also by

the end user by following the simple sequence below.

•

Holding down the door-release button, press and release button 1 of the add-on 1407/051. The indoor

station will play a tone.

•

Continuing to hold down the door-release button, press button 1 of the add-on 1407/051 again to change

tune.

•

Release the door opener button when you have chosen the tone you want. The tone is now programmed.

. The indoor station will play a tone.

again to change the tone.

DS901407-001

PROGRAMMING DATA DELETION

Proceed as follows to delete all optional programming data (intercom calling code):

•

Hold the door opener button pressed and pick up the handset.

•

Press

and

at the same time for 3 seconds until you hear the deletion tone.

•

Release buttons

and

and hang up.

The deletion procedure will not change the programmed calling tones.

TECHNICAL SPECIFICATIONS

Power voltage: .................................................................................................................. 36 ÷ 48Vdc

Stand-by consumption: ....................................................................................................... 3,0mA max

Max. consumption: .............................................................................................................. 70mA max

Working temperature range: ............................................................................................. -5°C ÷ +45°C

Reference standards: .................................................................................. EN 61000-6-3, EN 61000-6-1

DS901407-001