Digital Electronics PS3650A-T42 Manual de instalación - Página 11

Navegue en línea o descargue pdf Manual de instalación para Monitor Digital Electronics PS3650A-T42. Digital Electronics PS3650A-T42 17 páginas.

Imprimir página

Installations

1.
Installation Requirements
• For easier maintenance, operation, and
improved ventilation, be sure to install the
PS-A at least 50mm [1.97 in.] away from
adjacent structures and other equipment.
50
[1.97]
50
[1.97]
50
[1.97]
• Be sure that the surrounding air
temperature and the ambient humidity are
within their designated ranges. Surrounding
air temperature 0 to 50
PS-3650A - 5 to 50
°
45
C). Ambient humidity: 10 to 90%RH
(wet bulb temperature: 39
°
HDD 29
C or less).
When installing the PS-A on the panel of a
cabinet or enclosure, "Surrounding air
temperature" indicates both the panel face
and cabinet or enclosure's internal
temperature.
Panel Face
50
[1.97]
30[1.18]
• Be sure that heat from surrounding
equipment does not cause the PS-A to
exceed its standard operating temperature.
Unit:mm[in.]
50
[1.97]
50
50
[1.97]
[1.97]
50
[1.97]
°
C: (with HDD:
°
C, PS-3651A - 0 to
°
C or less, with
Unit:mm[in.]
Inside Cabinet
30[1.18]
2.
PS-A Installation
(1) Create a Panel Cut following the dimen-
sions in the table below. Also, determine
the panel thickness according to the panel
thickness range with due consideration of
panel strength.
Unit: mm [in.]
PS-A
PS-A
X
+1
301.5
PS-
3650A
+0.04
[11.87
-0
(2) Confirm that the installation gasket is
attached to the PS-A unit and then place
the PS-A unit into the Panel from the front.
• It is strongly recommended that you
use the installation gasket, since it
absorbs vibration in addition to
repelling water.
To replace the installation gasket, see
"PS-3650A/PS-3651A Series
Hardware Manual".
11
4-R3[0.12]
X
or less
Y
+1
227.5
-0
-0
+0.04
]
[8.96
]
-0
Panel
thickness
Panel
thickness
1.6[0.06]
to
10.0[0.39]