Digital Electronics Corporation PS-2000B Series Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Almacenamiento Digital Electronics Corporation PS-2000B Series. Digital Electronics Corporation PS-2000B Series 17 páginas. Windows 2000 multi language preinstalled hard disk unit
También para Digital Electronics Corporation PS-2000B Series: Manual de instalación (16 páginas)

Imprimir página
4

Interface Specifications

RS-232C Interface (COM1/COM2/COM3/COM4)

Dsub 9 pin (Male)
1
2
3
4
6
7
8
Screw Size: (4-40): Inch Type
• The GND terminal is the signal ground. Be sure to connect the PL
unit's GND terminal to the other unit's SG (signal ground).
• FG and SG terminals are internally connected in the PS-B. When
connecting to another device, be sure to create an SG shorting
loop in your system.
Changing number 9 pin's [+5V/RI] can only be done for COM1, or COM3.
With COM2 and COM4, only [RI] is available. To change the COM1 or COM3
[+5V/RI] setting, remove the PS-B unit's cover and locate the changeover
switch on the side of the main circuit board. The factory setting is to [RI].
• Be sure to confirm what settings will be used by the other device
and set the dip switches accordingly. Failure to do so can result in
a unit malfunction or damage.
• Whenever changing the PS-B changeover switches, be sure to
first turn the PS-B's power supply OFF. Failure to do so can cause
a PS-B malfunction.
5
9
PS-2000B Series User Manual 1.4.1 RS-232C Interface
Signal
Pin No.
Name
1
CD
2
RXD
3
TXD
4
DT R
5
GND
9
Signal
Pin No.
Name
6
DSR
7
RT S
8
CT S
9
RI/+5V