Digital Electronics Corporation PLB910-42 Manual de instalación - Página 12
Navegue en línea o descargue pdf Manual de instalación para Panel táctil Digital Electronics Corporation PLB910-42. Digital Electronics Corporation PLB910-42 17 páginas.
Imprimir página5
Installing the PL
Use the following procedures to install the PL into a solid panel.
When using the optional 19 inch Mount Panel, refer to
the PL-RM200 unit's Installation guide for details.
1) Use the six (6) attachment screws included in the PL's packing box to attach
the mounting brackets to the PL main unit. Be careful that each bracket is
attached to the correct side.
2) Drill the attachment holes in the Installation Panel. Be sure to follow the
dimensions given for the attachment holes.
(Unit : mm [in.] - excluding projections)
105.4 [4.15]
90.1 [3.55]
• Depending on the panel's material and design, the panel's instal-
lation surface may need to be strengthened. If high levels of vibra-
tion are expected and the PL's installation surface (i.e. an opera-
tion panel's door, etc.) can move (i.e.open or close) due consider-
ation should be given to the PL's weight.
• Be sure all installation tolerances are maintained to prevent the
unit from falling out of its installation panel.
+1
+0.04
360.3
[14.19
–0
–0
Front View
12
]