Bitstream HYPERION-303 Manual - Página 3

Navegue en línea o descargue pdf Manual para Interruptor Bitstream HYPERION-303. Bitstream HYPERION-303 5 páginas. Managed industrial ethernet switch eurocard

Imprimir página
Quick start manual for
1.4
RJ-45 pinout is presented in the table.
1 (white and orange.)
2 (orange)
3 (white and green)
6 (green)
1 (white and orange)
2 (orange)
3 (white and green)
4 (blue)
5 (white and blue)
6 (green)
7 (white and brown)
8 (brown)
Distribution of signals for the RS-232 serial port CLI connectors shown in the following table:
RJ-45 connector
2
P
Input: 12-36V DC / 410mA power supply
–
Power: 9.8W
–
Reverse polarity protection
–
3
F
After connecting power supply first signalling diode should light LED Power. LEDs indicate
device booting. Device can be managed using any Ethernet interface or RS232/CLI.
4
D
IP parameters:
Adress: 192.168.0.10
User: admin
REV.
V1.03
HYPERION-303
RJ-45 connectors description
Fig. 6.
CONNECTOR RJ-45 (PE1-PE4) Ethernet 10 / 100Mbit / s
RXAn
RXBn
TXAn
TXBn
CONNECTOR RJ-45 (PE1-PE4) Ethernet 1000Mbit / s
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
PORT RS232
5
GND
7
TX – RX
8
RX – TX
OWER SUPPLY
-
IRST START
UP
EFAULT PARAMETERS
Mask: 255.255.255.0
Password: no password - empty
SHORT USER MANUAL HYPERION-303
- www.bitstream.pl/en /
RJ-45 connector
Channel transmitter n
Channel receiver n
Bidirectional contact +A
Bidirectional contact -A
Bidirectional contact +B
Bidirectional contact +C
Bidirectional contact -C
Bidirectional contact -B
Bidirectional contact +D
Bidirectional contact -D
DSUB-9 (female)
5
2
3
20 21.03.31
3/5