Digital Equipment AlphaServer 1000 Información de actualización - Página 11
Navegue en línea o descargue pdf Información de actualización para Servidor Digital Equipment AlphaServer 1000. Digital Equipment AlphaServer 1000 15 páginas. Cpu upgrade
También para Digital Equipment AlphaServer 1000: Información sobre la instalación (8 páginas)
Imprimir página
Installing the CPU Card
To install the new CPU card, refer to Figure 2 and follow these steps:
1. Slide the card into its designated slot on the system board making sure it slips entirely
into the slot.
2. Press inward on the handle clip on each end of the card until they catch in a closed
position.
3. Place the crossbar in position and screw in the single retaining screw.
Replacing the Top Cover and Side Panel
Follow these steps and refer to Figure 3 to replace the top cover and side panel of the
system unit:
1. Align the guides on the top and bottom inside of the side panel with the lip of the
system unit frame.
2. Tilt the side panel top towards the unit and lift the flange at the top of the panel over
the system unit frame.
3. Slide the panel forward into position.
4. Align the top cover with the top of the side panels and slide the cover gently onto the
unit from the rear (5). Hold down the top cover release latch (4) until the top cover is
in place, and then release it to secure the cover and panels.
5. Lock the top cover and side panels using the system unit key.
6. Set the On/Off switches on all external options connected to the system to the "on"
position.
7. Set the On/Off switch on the system unit to the "on" position.
Upgrading an AlphaServer 1000 System
5