Siemens SIMATIC DI 32x24VDC HA Manual de equipamiento - Página 27
Navegue en línea o descargue pdf Manual de equipamiento para Equipamiento industrial Siemens SIMATIC DI 32x24VDC HA. Siemens SIMATIC DI 32x24VDC HA 38 páginas. Digital input module
También para Siemens SIMATIC DI 32x24VDC HA: Manual (36 páginas)
Imprimir página
Article number
Potential separation channels
•
•
•
Isolation
Isolation tested with
Ambient conditions
Ambient temperature during operation
•
•
•
•
Dimensions
Height
Depth
Weights
Weight, approx.
Power supply (SELV/PELV)
Ensure that the power supply is safely disconnected in accordance with the following standard:
IEC/UL61010-2-201 This separation is referred to in the standard as SELV (Safety Extra Low
Voltage) / PELV (Protective Extra Low Voltage).
Make sure that the supply and input voltages of the ET 200SP HA IO device are generated safely
separately:
Nominal value: 24 VDC +-20% (
Cycle time
The cycle time describes the time slice in which signals from the inputs are acquired and
processed. The cycle time of the I/O module is 250 μs.
Minimum pulse length
In order for a pulse or an edge transition to be reliably detected by the I/O module, the signal
state must be active for at least the following duration:
Input delay + cycle time
DI 32x24VDC HA
Equipment Manual, 10/2021, A5E48262828-AB
between the channels
between the channels and backplane bus
between the channels and the power supply
of the electronics
horizontal installation, min.
horizontal installation, max.
vertical installation, min.
vertical installation, max.
6DL1131-6BL00-0PH1
No
Yes
No
1 500 V DC/1 min, type test
-40 °C
70 °C
-40 °C
60 °C
115 mm
138 mm
150 g
)
Technical specifications
27