Siemens SIMATIC ET 200AL Manual - Página 24

Navegue en línea o descargue pdf Manual para Equipamiento industrial Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 32 páginas. 10-link digital output module dq 8x24vdc/2a 8xm12
También para Siemens SIMATIC ET 200AL: Manual (38 páginas), Manual (50 páginas), Manual (38 páginas), Manual (37 páginas), Manual de equipamiento (46 páginas), Manual (26 páginas), Manual de equipamiento (28 páginas), Manual de equipamiento (27 páginas), Manual (25 páginas)

Imprimir página

Introduction

You connect the ET 200AL I/O modules via the BusAdapter BA-Send 1xFC via ET-Connection.

①

②

Figure 6-2

Required tools

Screwdriver with 3 to 3.5 mm blade

Required accessories

Use the bus cable for ET-Connection as connecting cable between the BusAdapter BA-Send

1xFC and the ET 200AL I/O modules.

We recommend using the Stripping Tool for ET-Connection (6ES7194-2KA00-0AA0) with

blade cassette green (6GK1901-1B...). This guarantees fast and safe stripping.

The bus cable is available in the following versions:

Bus cable for ET-Connection M8, prefabricated on one side with 1x M8 connector, 4-

pole, shielded

• Length 2 m: 6ES7194-2LH20-0AC0

• Length 5 m: 6ES7194-2LH50-0AC0

• Length 10 m: 6ES7194-2LN10-0AC0

• Length 15 m: 6ES7194-2LN15-0AC0

Bus cable for ET-Connection M8, PUR cable, prefabricated on one side with 1x M8

connector, 4-pole, shielded

• Length 2 m: 6ES7194-2MH20-0AC0

• Length 5 m: 6ES7194-2MH50-0AC0

• Length 10 m: 6ES7194-2MN10-0AC0

• Length 15 m: 6ES7194-2MN15-0AC0

Mixed configuration

Equipment Manual, 11/2020, A5E33344611-AD

BusAdapter BA-Send 1xFC

Connection element for ET-Connection bus cable

BusAdapter BA-Send 1xFC

Connecting

6.1 Connecting BaseUnit BU-Send