Siemens simatic ET 200MP Manual - Página 23

Navegue en línea o descargue pdf Manual para Equipamiento industrial Siemens simatic ET 200MP. Siemens simatic ET 200MP 39 páginas. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
También para Siemens simatic ET 200MP: Manual (40 páginas), Manual (24 páginas), Manual (29 páginas), Manual (47 páginas), Manual (26 páginas), Manual (28 páginas), Manual (50 páginas), Manual (34 páginas), Manual del usuario (44 páginas), Manual (30 páginas), Manual (25 páginas), Manual (42 páginas), Manual (28 páginas), Manual (33 páginas), Manual (49 páginas), Manual (36 páginas), Manual (28 páginas), Manual de equipamiento (35 páginas), Manual de equipamiento (32 páginas), Manual (29 páginas), Manual (34 páginas), Manual (36 páginas), Manual de equipamiento (50 páginas), Manual (45 páginas)

Imprimir página

The following table provides an overview of the maximum address spaces for the respective

interface modules.

IM 155-5 PN BA

IM 155-5 PN ST

IM 155-5 PN HF

IM 155-5 DP ST

NOTE

IO-Link Master behind an IM 155-5 DP ST

In connection with an IM 155-5 DP ST, you configure the IO-Link master exclusively using a

GSD file. Install the corresponding GSD file. You can find this for download on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/80206700).

Port configuration CPU

With an IO-Link Master CM 8xIO-Link, you can commission the IO-Link ports of the IO-Link

Master or the connected IO-Link devices in two different ways:

• Port configuration with STEP7 or GSD (without S7-PCT)

• Port configuration with S7-PCT

Port configuration with STEP7 or GSD (without S7-PCT)

Requirements

You have selected the "Port configuration without S7-PCT" check box in the configuration of

the IO-Link master in STEP 7.

Procedure

You configure the IO-Link master directly in STEP 7:

• Activate the diagnostics

• Configuration of the I/O data lengths for each port

• Activating the Port Qualifier Information (PQI)

• Port mode:

– Operation in "IO-Link Autostart" mode (default)

– Operation in "IO-Link Manual" mode

– Operated as DI

– Deactivated

Port configuration with S7-PCT

Requirements

Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)

Equipment Manual, 08/2022, A5E45488510-AB

Firmware version

Max. address space per

V4.0.2

V4.1.0

V3.0.1

V3.0.0

Parameters / address space

4.3 Address space

Max. address space per

station

64 bytes

512 bytes

244 bytes

module

64 bytes

256 bytes

32 bytes