Siemens SIMATIC NET Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Siemens SIMATIC NET. Siemens SIMATIC NET 28 páginas. Network components bus terminal
También para Siemens SIMATIC NET: Manual de instrucciones (29 páginas), Manual de instrucciones (50 páginas), Manual de instrucciones de montaje (6 páginas), Información sobre el producto (6 páginas), Manual de instalación (40 páginas), Manual de instalación (50 páginas), Manual de instalación (40 páginas), Manual de referencia (14 páginas), Manual de instalación (34 páginas), Manual de instalación (48 páginas), Manual de instrucciones (32 páginas)

Installation

2.1

Read the safety notices

Note the following safety notices. These relate to the entire working life of the device.

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

If a device is operated in an ambient temperature of more than 60 ℃, the temperature of

the device housing may be higher than 70 °C. The device must therefore be installed so

that it is only accessible to service personnel or users that are aware of the reason for

restricted access and the required safety measures at an ambient temperature higher than

60 ℃.

EXPLOSION HAZARD

DO NOT OPEN WHEN ENERGIZED.

EXPLOSION HAZARD

SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION

2 OR ZONE 2.

When used in hazardous environments corresponding to Class I, Division 2 or Class I,

Zone 2, the device must be installed in a cabinet or a suitable enclosure.

12M bus terminal

Siemens Distributor

Operating Instructions, 07/2013, C79000-G8976-C333-01

WARNING