Siemens SIMATIC RF1070R Manual - Página 18
Navegue en línea o descargue pdf Manual para Equipamiento industrial Siemens SIMATIC RF1070R. Siemens SIMATIC RF1070R 34 páginas.
Imprimir página
2 Engineering of the STEP 7 Program
2.5
Diagnostics and error messages
The "ReadUID" function block provides the status of the instruction via the output
parameter "status" and, in the case of an error, various error messages via the
"status" and "diagnostics" output parameters.
Status of the instruction
The following table provides an overview of the instruction status.
Table 2-4
"status"/
"diagnostics.status"
16#8400
16#8601
16#8602
16#8603
"status"
16#7000
16#7001
16#7002
16#7004
16#7006
16#0001
Error messages
The following table provides an overview of the error messages from the
"ReadUID" function block.
Table 2-5
"status"/
"diagnostics.status"
16#8400
16#8601
16#8602
16#8603
Reading out UID with SIMATIC RF1070R
Article ID: 109780625,
V1.0,
Reader error. No card has been selected.
"Port_Config" error
The status or returned value from the internal instruction can be
found in the tag "diagnostics.subfunctionStatus"
"Send_P2P" error
The status or returned value from the internal instruction can be
found in the tag "diagnostics.subfunctionStatus"
"Receive_P2P" error
The status or returned value from the internal instruction can be
found in the tag "diagnostics.subfunctionStatus"
No job processing active.
Initial call when job is started.
Second call when job is started.
Monitoring of the antenna field of the RF1070R reader.
New UID has just been read.
The parameterization of the CM1241 RS232 communication
module and resetting of the SIMATIC RF1070R reader have
been completed successfully.
Reader error. No card has been selected.
"Port_Config" error
The status or returned value from the internal instruction can be
found in the tag "diagnostics.subfunctionStatus"
"Send_P2P" error
The status or returned value from the internal instruction can be
found in the tag "diagnostics.subfunctionStatus"
"Receive_P2P" error
The status or returned value from the internal instruction can be
found in the tag "diagnostics.subfunctionStatus"
09/2020
Meaning
(Table
(Table
(Table
Meaning
Meaning
(Table
(Table
(Table
2.6).
2.6).
2.6).
2.6).
2.6).
2.6).
18