Siemens SIMATIC RTLS Series Manual del dispositivo - Página 10
Navegue en línea o descargue pdf Manual del dispositivo para Equipamiento industrial Siemens SIMATIC RTLS Series. Siemens SIMATIC RTLS Series 19 páginas. Localization systems
También para Siemens SIMATIC RTLS Series: Manual (19 páginas), Manual del dispositivo (15 páginas), Manual de instrucciones (17 páginas), Manual de instrucciones (26 páginas)
Imprimir página
3 Installation, initial start-up, safety
3.1 General information
The devices can only be used in combination with the WLS.
•
Buildup, installation as well as the use of the tools and clients of the localization system are
•
described in the corresponding guides and manuals.
3.2 Installation
Carefully read all items listed in section 3 (Installation, initial start-up, safety) before installing
•
the devices in order to safeguard correct installation and operation.
The device is destined for fixed installation onto walls or ceilings.
•
The installation has to be carried out by appropriately qualified and trained personnel and
•
according to the installation guide.
Follow the references concerning the surrounding conditions when installing and operating the
•
devices.
Make sure that all screws are screwed tightly to the wall/ceiling and that they are able to carry
•
the weight of device and wiring.
The ambient temperature must not exceed 50 °C. Avoid installing devices at locations exposed
•
to direct sunlight.
The installation of the devices has to be carried out according to the applicable provisions for
•
the installation of electrical systems and utilities. The devices have to be fitted accessible (to
open the housing cover) for later maintenance.
3.3 Connecting the cables
Make sure the twist-lock plugs are locked into place correctly to prevent the ingression of
•
moisture.
Make sure that any wiring has been carried out correctly before the start-up of the device.
•
Use solely wiring as described in the manual, enclosed with the device or specified accordingly.
•
Agilion GmbH is not liable for any damages or impairment of functionality resulting from the use
of other cables.
Note
Insofar as any connectors are not in use, they have to be sealed with the appropriate caps.
The caps are attached to the device.
10
Device manual, 10/2018, C79000-G8976-C515-01
SIMATIC RTLS4030G