Siemens SIMATIC RTLS4083T Manual de instrucciones - Página 18
Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Siemens SIMATIC RTLS4083T. Siemens SIMATIC RTLS4083T 30 páginas. Localization systems
También para Siemens SIMATIC RTLS4083T: Manual de instrucciones (33 páginas), Manual del dispositivo (11 páginas), Manual de instrucciones (37 páginas), Manual de instrucciones (24 páginas)
Imprimir página
Installation & operation
3.4 Charging instructions for the RTLS charging station
3.2.2
RTLS4083T operation with Power mounting clip
Note
Operate the transponder only with the accessories intended for this purpose, which are listed in
the section "Order data for RTLS4083T and accessories (Page 9)".
The transponder is delivered in the switched-off state. To commission the transponder, it
has to be inserted into the associated charging station or Power mounting clip once so
that the green LED on the device lights up. The mode of the transponder in the active clip
behaves like operation in the charging station. There is no differentiation by the transponder
or Locating Manager. This also includes charging of the battery like in the charging station.
When the transponder is operated continuously in the active clip, the battery is regularly
charged, with the transponder being supplied by the external supply voltage.
The transponder is only charged if the ambient conditions as described in the sections
"Charging instructions for the RTLS charging station (Page 18)" and "RTLS4083T technical
specifications (Page 21)" are met.
3.3
Cleaning and maintenance
The enclosure of the transponder must not be opened.
The devices specified in this document may only be repaired or opened for other types of
work by an authorized maintenance company.
Improper opening or repairing of the devices may result in serious risks for the user. Opening
the devices without permission renders the warranty of the Siemens AG null and void.
Do not clean the devices with liquids or abrasive, caustic or flammable cleaning products.
Note
Due to the integrated battery, the RTLS4083T transponder is a hazardous good. Observe the
applicable regulations when shipping.
3.4
Charging instructions for the RTLS charging station
Mount the charging station in a location with cool ambient temperature. Then, fully charge the
transponder using the charging station.
The temperature of the transponder and the ambient temperature must not exceed 40 °C for
the transponder to be charged. The higher the temperature, the longer it takes to charge the
transponder.
If the transponder exceeds 55 °C during charging, remove the transponder from the charging
station. Allow the transponder to cool down and try charging it again. If the transponder
becomes too hot again, remove the transponder from the charging station and contact
customer service.
18
Operating Manual, 05/2023, C79000-G8976-C646-05
SIMATIC RTLS4083T