Siemens Simatic S7-300 Primeros pasos - Página 25

Navegue en línea o descargue pdf Primeros pasos para Equipamiento industrial Siemens Simatic S7-300. Siemens Simatic S7-300 32 páginas. Automation systems, controlling a physical axis
También para Siemens Simatic S7-300: Manual del usuario (34 páginas), Manual (21 páginas), Instrucciones de uso (4 páginas), Instrucciones de uso (5 páginas), Manual (35 páginas), Primeros pasos (8 páginas), Primeros pasos (16 páginas), Descripción de la aplicación (24 páginas), Manual (18 páginas), Manual (32 páginas), Manual de instalación y hardware (20 páginas)

3.9

8. Step: Creating the technology DBs

Procedure

Step

Activity

Change to "Technology Objects Management". Confirm the first message box with "OK", and the second

with "Yes".

If you are not running the "Technology Objects Management" application yet or it is closed, you can open it

by double-clicking on the "Technological objects" object in the "Technology" folder in the SIMATIC

Manager (refer also to step "Configuring the axis(axes) with S7-Technology").

Result: "Technology Objects Management" opens.

Edit the DB numbers as shown in the figure in order to adapt these for use in our example.

Create the following technology DBs by selecting all lines

and clicking "Create":

Axis_1

•

Axis_2 (if this exists)

•

Trace

•

MCDevice

•

Close "Technology Objects Management".

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05

3.9 8. Step: Creating the technology DBs

Result

The system generates the technology DB 1

to DB 3, or DB 4 respectively.

Learning units