Siemens SINAMICS G130 Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Siemens SINAMICS G130. Siemens SINAMICS G130 46 páginas. Line filter
También para Siemens SINAMICS G130: Manual de instrucciones (24 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (31 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (22 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (34 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (38 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (22 páginas), Manual de instrucciones (24 páginas)

General

NOTICE

Damage to the Voltage Peak Limiter due to interchanged connections

The Voltage Peak Limiter will be damaged if the input and output connections are

interchanged.

• Connect the incoming cable from the DC link of the Power Module to DCPS, DCNS.

• Connect the outgoing cable for the dv/dt reactor to 1U2, 1V2, 1W2.

NOTICE

Damage to the dv/dt filter by using components that have not been released

When using components that have not been released, damage or malfunctions can occur

at the devices or the system itself.

• Only use dv/dt filters that SIEMENS has released for operation with SINAMICS.

NOTICE

Damage to the dv/dt filter by exceeding the maximum output frequency

The maximum permissible output frequency when using a dv/dt filter is 150 Hz. The dv/dt

filter can be damaged if the output frequency is exceeded.

• Operate the dv/dt filter with a maximum output frequency of 150 Hz.

NOTICE

Damage to the dv/dt filter by exceeding the maximum pulse frequency

The maximum permissible pulse frequency when using a dv/dt filter is 2.5 kHz or 4 kHz.

The dv/dt filter can be damaged if the pulse frequency is exceeded.

• When using the dv/dt filter, operate the Power Module with a maximum pulse frequency

NOTICE

Damage to the dv/dt filter if it is not activated during commissioning

The dv/dt filter may be damaged if it is not activated during commissioning.

• Activate the dv/dt filter during commissioning via parameter p0230 = 2.

of 2.5 kHz or 4 kHz.

dV/dt filter plus Voltage Peak Limiter

Operating Instructions, 04/2014, A5E00692302A