Siemens SINAMICS G130 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Siemens SINAMICS G130. Siemens SINAMICS G130 28 páginas. Line filter
También para Siemens SINAMICS G130: Manual de instrucciones (24 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (31 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (22 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (34 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (38 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (22 páginas), Manual de instrucciones (24 páginas)

General

Description

Line reactors limit low-frequency line-side harmonics to permissible values.

Non-observance of the fundamental safety instructions and residual risks

The non-observance of the fundamental safety instructions and residual risks stated in

Chapter 1 can result in accidents with severe injuries or death.

• Adhere to the fundamental safety instructions.

• When assessing the risk, take into account residual risks.

Burns resulting from high surface temperature

The line reactors can become very hot. You can get seriously burnt when touching the

surface.

• Mount the line reactors so that contact is not possible. If this is not possible, attach

• To prevent adjacent components from suffering damage due to these high

NOTICE

Damage of the system caused by the use of inappropriate and not approved line reactors

Inappropriate and not approved line reactors can damage the Line Modules.

Line harmonics that damage/disturb other loads connected to the same line supply can also

occur.

• Only use line reactors listed in this manual.

Note

Malfunctions through magnetic fields

Reactors produce magnetic fields that can disturb or damage components and cables.

• Arrange the components and cables at a suitable distance (at least 200 mm) or shield the

magnetic fields appropriately.

Line reactors

Operating Instructions, 11/2017, A5E00331462A

WARNING

CAUTION

clearly visible and understandable warning notices at hazardous positions.

temperatures, maintain a clearance of 100 mm on all sides of the line reactors.