Siemens SINUMERIK 840D sl Manual de equipamiento - Página 6

Navegue en línea o descargue pdf Manual de equipamiento para Equipamiento industrial Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 28 páginas. Operator panel front: op 010s
También para Siemens SINUMERIK 840D sl: Instrucciones de actualización (4 páginas), Instrucciones de actualización (5 páginas), Manual de instrucciones (33 páginas), Manual de puesta en servicio (36 páginas), Instrucciones de actualización (3 páginas), Instrucciones de actualización (3 páginas), Manual del sistema (44 páginas), Manual de equipamiento (48 páginas), Manual de equipamiento (26 páginas), Manual de equipamiento (28 páginas)

Fundamental safety instructions

1.1 General safety instructions

Electric shock due to equipment damage

Improper handling may cause damage to equipment. For damaged devices, hazardous

voltages can be present at the enclosure or at exposed components; if touched, this can result

in death or severe injury.

• Ensure compliance with the limit values specified in the technical data during transport,

• Do not use any damaged devices.

Electric shock due to unconnected cable shields

Hazardous touch voltages can occur through capacitive cross-coupling due to unconnected

cable shields.

• As a minimum, connect cable shields and the cores of cables that are not used at one end

Electric shock if there is no ground connection

For missing or incorrectly implemented protective conductor connection for devices with

protection class I, high voltages can be present at open, exposed parts, which when touched,

can result in death or severe injury.

• Ground the device in compliance with the applicable regulations.

NOTICE

Damage to equipment due to unsuitable tightening tools.

Unsuitable tightening tools or fastening methods can damage the screws of the equipment.

• Be sure to only use screwdrivers which exactly match the heads of the screws.

• Tighten the screws with the torque specified in the technical documentation.

• Use a torque wrench or a mechanical precision nut runner with a dynamic torque sensor and

WARNING

storage and operation.

WARNING

at the grounded housing potential.

WARNING

speed limitation system.

Emergency stop button

Equipment Manual, 10/2020, A5E49939755B AA