Siemens SIPART PS2 Instrucciones de uso Compact - Página 23

Navegue en línea o descargue pdf Instrucciones de uso Compact para Equipamiento industrial Siemens SIPART PS2. Siemens SIPART PS2 35 páginas. Mounting bracket kit
También para Siemens SIPART PS2: Instrucciones de instalación (4 páginas), Manual de instrucciones (28 páginas), Instrucciones de instalación (4 páginas), Manual de instalación del hardware (30 páginas), Descripción técnica (26 páginas), Instrucciones de instalación del kit (9 páginas), Instrucciones de instalación (11 páginas)

A linear movement of the magnet in the sensor range also generates a resistance change that is used to identify the

position. The following figure highlights the principle:

①

Magnet

②

Sensor

Figure 3-3

Resistance change depending on the position of the magnet

Non-linearity is corrected automatically in the SIPART PS2 positioner by software.

The great advantage of this principle is the absence of wear. Moreover, vibration, dampness and temperature only have a

minor impact on the measurement result.

Mounting

4.1

Mounting the NCS to the rotary actuator

Prerequisites

1. An EMC filter module in the positioner.

2. An NCS for rotary actuators 6DR4004-.N.10

3. A rotary actuator with interface to VDI/VDE 3845 and mounting console to VDI/VDE 3845, or a rotary actuator with

manufacturer-specific interface.

SIPART PS2 Non-Contacting Sensor (NCS)

A5E00097485-07, 01/2012

③

Resistance change

④

Angle