Siemens SIREMOBIL Compact L Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Siemens SIREMOBIL Compact L. Siemens SIREMOBIL Compact L 21 páginas.
También para Siemens SIREMOBIL Compact L: Manual de instrucciones de instalación y ajuste (28 páginas), Instrucciones de instalación y ajuste (4 páginas), Manual de instrucciones de instalación (6 páginas)

Replacement of the 15" LCD Color TFT Display

Brightness, contrast and back light

Fig. 5

NOTE

Requirements

•

The basic unit and monitor cart are connected to each other. The Memoskop is

synchronized by the VIDEOMED DC camera.

•

At the MEMOSKOP, call up the SMPTE test pattern. (Technical setup)

•

At the Memoskop keyboard, select the brightness/contrast curve LUT 2 for both

displays.

Adjustments

•

At the MEMOSKOP, LUT2 must be selected for both monitors

•

Activate the OSD menu on the TFT display.

•

Scroll to the menu "Picture Setup" with the "UP" and "DOWN" key and select it with the

"Enter" key.

•

Scroll to the corresponding line Brightness, Contrast or Back light intensity with the "UP"

and "DOWN" key and select it with the "Enter" key.

•

Set Brightness, Contrast and Back light intensity to the middle value "50%" and confirm it

by pressing the "Enter" key.

Siemens AG

Medical Solutions

For the adjustment, set the OSD time to "Off"

(permanent visible OSD menu) by selecting the OSD menu

"Options" - "Onscreen Menu" - "OSD Time".

After the adjustments, set it back to the default value

(20 seconds).

For correct adjustments of the brightness, contrast and

back light intensity, the TFT Display needs a warmup phase of 20

minutes.

The MEMOSKOP brightness/contrast curve LUT2 must be

selected for both displays.

SPR2-130.841.03

Rev. 02

Page 13 of 20

06.05

CS PS 24

Siremobil Compact L