Digital Factory P461-TMX4D Manual de instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Soporte para TV Digital Factory P461-TMX4D. Digital Factory P461-TMX4D 9 páginas. Video wall brackets
Imprimir páginaPerfectAlign™ Video Wall Brackets will not work with any other model or brand of
Display. You must select the correct part number for the NEC display used – brackets
cannot be mixed or interchanged.
PerfectAlign™ Video Wall Brackets are intended for landscape use only. Portrait
orientation is available by Special Order. Landscape and Portrait brackets cannot be
mixed or interchanged.
WALL OR LOAD BEARING STRUCTURE
The PerfectAlign™ system is designed to perform best with a supporting structure
that is plumb and straight. Always check the wall BEFORE mounting PerfectAlign™
using a carpenter's level or other sighting device.
If the wall is not plumb and straight you have two choices – either fix the wall or
install a straight mounting surface utilizing MDF. If using MDF, shim and plumb to
level and bolt to the wall using industry standard techniques to insure a safe
mounting surface for PerfectAlign™. Bottom line, if your wall is not straight, your
Video Wall will not be straight either.
DIGITAL FACTORY FLYBEAM (Aircraft Cable, Pole, Mobile or Free Standing Video
Walls)
Digital Factory's FLYBEAM system permits a Tile Matrix display to be flown,
suspended from poles, mounted on I beams & mobile tracks as well as free standing
installations. Please contact us directly for additional information on this custom
ordered product.
VIDEO WALL SHEAR WEIGHT
The PerfectAlign™ Bracket has been designed to fully support the weight of your
Display when properly installed on a load bearing wall or structure.
The SHEAR WEIGHT of the entire VideoWall is determined by multiplying the weight
of each display and bracket by a factor of four (4). Please check your local codes for
specific load bearing requirements in your locality.
The average weight for a PerfectAlign™ Bracket is 25 lbs. which includes all
mounting hardware.
Example: If you are using a display which weighs 80 lbs., the total weight is 105 lbs.
for each mounted display. The fasteners and the wall must be capable of supporting
a minimum of four times (4X) the weight of each display.
Page 2 of 9