Samsung 400DXn - SyncMaster - 40" LCD Flat Panel Display Manual de inicio rápido - Página 11
Navegue en línea o descargue pdf Manual de inicio rápido para Monitor Samsung 400DXn - SyncMaster - 40" LCD Flat Panel Display. Samsung 400DXn - SyncMaster - 40" LCD Flat Panel Display 25 páginas. 40", 46" and 52" professional lcd displays
También para Samsung 400DXn - SyncMaster - 40" LCD Flat Panel Display: Especificaciones (2 páginas)
Imprimir página
Using a Power cord with Earth
In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in
correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect
the AC power in advance.
Note
• AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected
to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls
under Adjusting Your LCD Display.
Connecting a Computer
1)
Connect the power cord for your LCD Display to the power port on the back of the LCD Display.
Trun on the power switch.
2)
There are 3 ways to connect the D-sub to your LCD Display.
Choose one of the following:
2-1)
Using the D-sub (Analog) connector on the video card.
Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the 15 pin D-
sub Port on the computer.
2-2)
Using the DVI (Digital) connector on the video card.
Connect the DVI Cable to the DVI(HDCP) port on the back of your LCD Display and the DVI port
on the computer.
2-3)
Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports on the back of your
LCD Display and the 15 pin D-sub Port on the computer.