Samsung 5 Series Manual de configuración rápida

Imprimir página

Samsung 5 Series Manual de configuración rápida

Quick Setup Guide

Congratulations on the purchase of your new Samsung TV.

Read this setup guide to get your TV up and running quickly.

1-800-SAMSUNG (1-800-726-7864)

STOP

Samsung Electronics America, Inc.

85 Challenger Road Ridgefield Park, NJ 07660-2112

Please do not return this unit.

Samsung Electronics Canada Inc.

55 Standish Court Mississauga, Ontario L5R 4B2

If you have problems operating your

Call Center hours of operation: Mon-Sun, 9:00 AM -12

TV, call:

AM EST.

1-800-SAMSUNG (1-800-726-7864)

To register this product, visit: www.samsung.com/

For web support please visit:

www.samsung.com/support

Step 1

: Install the Stand

Follow the steps below to connect the TV to the stand.

✎

NOTE

Make sure to distinguish between the front and back of the Stand and

Guide Stand when assembling them.

Make sure that at least two persons lift and move the LCD TV.

Stand the product up and fasten the screws. If you fasten the screws with

the LCD TV placed down, it may lean to one side.

Connect the Guide Stand to the

Stand using four screws

(M4 X L12) as shown.

With your TV upright, connect

the TV to the Stand as shown.

Front

Rear

Step 2

: Install the Batteries into the Remote

To install batteries into your remote control,

follow these steps:

1. Lift the cover on the back of the remote

upward as shown in the figure to the right.

2. Install two AAA batteries.

✎

Make sure to match the + and -

ends of the batteries to the diagram

in the battery compartment.

3. Replace the cover.

Step 3

: Connect Power and Antenna or Cable

Best to use 75 ohm (round) cable.

Make sure the AC power cord is plugged in securely to

the wall outlet and the TV.

Screws (M4 X L12)

Top view

Guide Stand

Stand

Rear

Fasten the two screws (M4 X L12) at

position 1, and then fasten the two

screws (M4 X L12) at position 2.

VHF/UHF Antenna

Connect Ant In to

Antenna Cable (Not Supplied)

• Wall cable jack

• VHF/UHF Antenna

• Cable or Satellite box

Ant or Cable Out

Step 4

: Connect External Devices

Connecting an AV device (DVD/ Blu-ray player, cable/satellite bo

Use one of the connections below to connect your TV to an external A/V device. We re

Very Good Connection

HD connection (up to 720p/1080i)

Using an HDMI to DVI Cable

Device

Good Connection

Component connection (up to 720p/1080i)

Using a Component Cable

DVD / Blu-ray player / HD Cable Box / HD Satellite receiver (STB)

Device

COMPONENT OUT

Front

Rear

Step 5

: Run Plug & Play

When you turn on your TV for the first time, it automatically launches the Plug &

Play function. With Plug & Play, you can select the On Screen Display language,

set the clock mode, and launch the TV's channel memorizing process.

It also displays connection instructions similar to those in this guide.

To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow

buttons on your remote. To make a selection, press the ENTERE button.

To skip a screen, press the

button on the remote or on the TV. To run Plug & Play, follow these steps:

Using your remote control,

select the language for the On

Screen Display (OSD), and then

press the ENTERE button.

Select Home Use, and then

press the ENTERE button. If

you select Store Demo, the TV

will reset your picture and audio

settings every 30 minutes.

Select the Antenna Source

to memorize. you must select

Antenna Source to same type

as your cable system type. After

selecting source, select Start;

then press the ENTERE

button on your remote.

HDMI to DVI Cable

(Not Supplied)

AUDIO OUT

DVI OUT

AUDIO OUT

Audio Cable (Not Supplied)

Component Cable (Not Supplied)

button. To turn on your TV, press the

Plug & Play

Select Language of the OSD.

Language

Plug & Play

Select 'Home Use' when installing this TV in your home.

Store Demo

Plug & Play

Select the Antenna source to memorize.

Air

Cable

Auto

Audio Cable

(Not Supplied)

POWER

English

Español

Français

U Move E Enter

Home Use

L Move E Enter

Start

U Move E Enter m Skip