Epson 1815p - PowerLite XGA LCD Projector Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Proyector Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 27 páginas. Release of check tool for network projectors v1.00 for windows
También para Epson 1815p - PowerLite XGA LCD Projector: Manual del usuario (42 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (47 páginas), Configuración rápida (2 páginas), Manual del usuario (1 páginas), Manual de funciones (5 páginas), Manual de software (2 páginas), Declaración de conformidad (4 páginas), Lista de piezas (1 páginas), Boletín de asistencia sobre productos (45 páginas), Boletín de asistencia sobre productos (25 páginas), Boletín de asistencia sobre productos (22 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (41 páginas), Boletín de asistencia sobre productos (34 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (15 páginas), Boletín de asistencia sobre productos (22 páginas)

Imprimir página

Epson 1815p - PowerLite XGA LCD Projector Manual del usuario

3. Make sure Location is set to

Select

Automatic

Select

Network Port

Configurations

then select

AirPort

4. Select

Network Port Configurations

down menu.

5. Under Port Configurations, select

6. Click

. Then close the window.

Apply Now

7. Click the AirPort icon on the menu bar at the top of the Mac

desktop. You see the AirPort status menu:

Choose the ESSID

you assigned to the

projector

8. Check to make sure AirPort is turned on.

9. Select your projector's ESSID.

Note: If you don't need the other network port configurations,

disable them by deselecting their checkboxes.

Now you're ready to connect to the projector. See "Projecting

Over a Network" on page 17.

Using Access Point Mode

To use Access Point (infrastructure) mode, first adjust your

projector and wireless access point or AirPort base station

settings as described in this section.

Configuring the Projector

1. Press the

button, then choose

Enter

2. Choose

Network Configuration

Automatic

in the Show pull-

AirPort

and press

Network

and press

Enter

3. Choose

Wireless LAN

4. Make sure

Advanced

If not, use the

highlight

Advanced

5. If your network is using 802.11a, use the

on the remote control to highlight

to select it.

6. To enable your computer to find the projector on the

network, you need to enter the SSID name of your access

point or AirPort network in the

of your AirPort network may be different from that of your

AirPort base station; select your base station in the AirPort

Admin utility and click

your network.)

Highlight the

ESSID

name. Note that the ESSID is case-sensitive (if you enter the

name in uppercase on the projector, you must type it the

same way on the computer connecting to the projector).

Use the

pointer button to select individual letters; then

press

to input a character. To add a blank space or to

Enter

navigate backward and forward through the input text,

highlight the arrows and press

settings or capital letters, highlight the option and press

. When you're done, highlight

Enter

7. If your access point assigns IP addresses automatically, turn

. Otherwise, turn off DHCP and enter the

DHCP

following information:

3/08

PowerLite 1810p/1815p

and press

. You see this screen:

Enter

is selected for the Connection mode.

pointer button on the remote control to

, then press

to select it.

Enter

pointer button

, then press

802.11a

text box. (The name

ESSID

to check the name of

Configure

text box, press

, and enter a

Enter

. To toggle symbol

Enter

and press

Finish

PowerLite 1810p/1815p

Enter