Epson 1815p - PowerLite XGA LCD Projector Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Proyector Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 27 páginas. Release of check tool for network projectors v1.00 for windows
También para Epson 1815p - PowerLite XGA LCD Projector: Manual del usuario (42 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (47 páginas), Configuración rápida (2 páginas), Manual del usuario (1 páginas), Manual de funciones (5 páginas), Manual de software (2 páginas), Declaración de conformidad (4 páginas), Lista de piezas (1 páginas), Boletín de asistencia sobre productos (45 páginas), Boletín de asistencia sobre productos (25 páginas), Boletín de asistencia sobre productos (22 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (41 páginas), Boletín de asistencia sobre productos (34 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (15 páginas), Boletín de asistencia sobre productos (22 páginas)

Imprimir página

Epson 1815p - PowerLite XGA LCD Projector Manual del usuario

PowerLite 1810p/1815p

2. Aim the projector so the message appears near the middle of

the screen. Then use the zoom ring to enlarge the image so

the white frame (not shown above) extends beyond the edges

of the screen on all sides.

3. Press the

button again. Two white boxes flash

Quick Setup

momentarily onto the screen, and the adjustment is

complete. Your projected image now fits on the screen (some

slight overlap is normal).

The Quick Setup adjustment is retained when the projector is

turned off. If the projector is installed in a fixed location, you

won't need to repeat the adjustment each time you turn it on.

To fine-tune the Quick Setup adjustment, use Quick Corner

Using Quick Corner

Use Quick Corner to adjust the shape and size of the image

when it's uneven on all sides, or to finely adjust the image after

performing Quick Setup. If you just used Quick Setup, you can

use the projector's arrow buttons to make the Quick Corner

adjustment. If not, you'll have to select

follows:

1. Press the

button on the remote control or on the

projector's control panel.

2. Select the

menu and press

Settings

3. From the Settings menu, select

4. Select

and press

Quick Corner

You see this screen:

5. Use the

pointer button on the remote control (or the

arrow buttons on the projector) to select the corner you want

to adjust, and press

Enter

6. Use the

pointer button on the remote control (or the

arrow buttons on the projector) to adjust the shape.

7. Repeat steps 5 and 6 as needed to adjust any remaining

corners.

When done, press

PowerLite 1810p/1815p

Quick Corner

Enter

and press

Keystone

Enter

to exit the menu system.

Using Keystone Correction

The projector automatically corrects vertical keystone distortion

when it is tilted within a range of 30° up or down.

Projector tilted up

It takes about one second after projection starts for the image to

be corrected. During this time, a vertical keystone correction

gauge appears on the screen. If keystone correction isn't

automatically performed, you may need to turn on the

Auto V-Keystone

You can manually adjust the shape of the image to compensate

for vertical and horizontal keystone distortion. First make sure

the Keystone setting in the projector's menu system is set to

H-Keystone

1. Press the

projector's control panel).

2. Select the

3. From the Settings menu, select

4. Select

H/V-Keystone

Enter

5. Select

H-Keystone

V-Keystone

arrow buttons to adjust the shape of the image.

Vertical

keystone

adjustment

Horizontal

keystone

adjustment

If the image becomes smaller, use the zoom ring to enlarge the

image so it fits the screen. If the image contains faint lines or a

gridlike pattern, decrease the sharpness setting.

Resizing Video images

You can use the

how an image fits into the display area. Press

the aspect ratio between 4:3 and 16:9. This lets you play certain

digital video images or movies recorded on certain DVDs in

3/08

Corrected image

setting in the projector's menu system.

V-Keystone

button on the remote control (or on the

menu and press

Settings

Enter

Keystone

and press

Enter

(for horizontal adjustment) or

(for vertical adjustment) and use the l and r

button on the remote control to adjust

Resize

Projector tilted down

and press

Enter

to switch

Resize