Samsung 73V Manual del usuario - Página 26
Navegue en línea o descargue pdf Manual del usuario para Monitor Samsung 73V. Samsung 73V 47 páginas.
Imprimir página1. Choose " OK " button on the " Insert disk " window.
2. Click the " Browse " button on the " File Needed " window.
3. Choose A:(D:\Driver) then click the "Open" button and then click " OK " button.
How to install
1. Click " Start " , " Setting " , " Control Panel ".
2. Double click the " Display " Icon.
3. Choose the " Settings " tab and then click " Advanced.. ".
4. Choose " Monitor ".
Case1: If the "Properties" button is inactive, it means your monitor is properly configured. Please
stop installation
Case2: If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
5. Click " Driver " and then click on " Update Driver.. " then click on the "Next" button.
6. Choose " Display a list of the known drivers for this device so that I can choose a specific
driver " then click " Next " and then click " Have disk ".
7. Click the " Browse " button then choose A:(D:\Driver).
8. Click the " Open " button, then click " OK " button.
9. Choose your monitor model and click the " Next " button then click " Next " button.
10. Click the " Finish " button then the " Close " button.
If you can see the " Digital Signature Not Found " window then click the " Yes "button. And click
the " Finish " button then the " Close " button.
®
Microsoft
Windows
1. Click Start , Settings , Control Panel , and then double-click Display icon.
2. In Display Registration Information window, click Settings Tab and then click All Display Modes .
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then
click OK .
4. Click Apply button if you see the screen working normally after clicking Test. If the screen is not
normal, change to a different mode (lower mode of resolution, colors or frequency).
If there is no Mode at All Display Modes , select the level of resolution and vertical frequency
by referring to the
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1. Press Enter at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse .
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard .
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor .
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor . This information will not affect the actual execution of X-
Window.
10. You have finished setting up your monitor.
Execute X-Window after setting other requested hardware.
®
NT Operating System
Preset Display Modes
in the user guide.