Cisco 6800 Series Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco 6800 Series. Cisco 6800 Series 22 páginas. Ip phone, multiplatform phones
También para Cisco 6800 Series: Manual de inicio rápido (3 páginas), Manual del usuario (8 páginas), Manual de mantenimiento (8 páginas), Manual del usuario (14 páginas), Manual de solución de problemas (12 páginas), Manual de inicio rápido (4 páginas), Instalación del hardware (20 páginas), Manual de inicio rápido (4 páginas), Manual de instalación (39 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas)

Place a Call on Hold with Call Park

You can park an active call that you answered on your phone and then use another phone in the call control

system to retrieve the call.

You can also park a call on your own phone. If so, then you may not hear a recording.

You can park only one call at the call park number.

Before you begin

Your call must be active.

Procedure

Step 1

Press Park.

Your phone plays a recorded message that asks for the number of the parked call.

Step 2

(Optional) If you have call park configured on a key expansion module, press the call park line key.

Step 3

Enter the number and press Pound (#).

Step 4

(Optional) Communicate the parked number to the person retrieving the call.

Retrieve a Call on Hold with Call Park

You can pick up a parked call from anywhere in your network.

Before you begin

You need the number that was used to park the call.

Procedure

Step 1

Press Unpark.

Step 2

(Optional) Press the line key that has busy lamp field with call pickup configured to retrieve a call on hold.

Step 3

(Optional) If you have call park configured on a key expansion module, press the call park line key.

Step 4

Enter the number where the call is parked followed by Pound (#).

You can also enter Pound (#) to retrieve the parked call. If you retrieve a call parked on your own phone, you

may not need to enter a number.

Park and Unpark a Call with One Line Key

If your administrator has configured a Busy Lamp Field (line status) list with the prk function for you, you

can park and unpark active calls. See

This feature doesn't apply to phone Cisco IP Phone 7811.

Calls

Coworker Line Status

for the idle and Parked call icons.

Calls