Epson 745c - PowerLite XGA LCD Projector Manual - Página 20

Navegue en línea o descargue pdf Manual para Proyector Epson 745c - PowerLite XGA LCD Projector. Epson 745c - PowerLite XGA LCD Projector 24 páginas. Release of check tool for network projectors v1.00 for windows
También para Epson 745c - PowerLite XGA LCD Projector: Manual del usuario (42 páginas), Manual de instrucciones (36 páginas), Manual de configuración rápida (2 páginas), Manual de instrucciones (47 páginas), Lista de piezas (1 páginas), Boletín de asistencia sobre productos (30 páginas), Configuración rápida (4 páginas), Manual de instalación (19 páginas), Manual del usuario (1 páginas), Resumen técnico (7 páginas), Boletín de asistencia sobre productos (25 páginas), Boletín de asistencia sobre productos (38 páginas), Boletín de asistencia sobre productos (12 páginas), Boletín de asistencia sobre productos (42 páginas), Boletín de asistencia sobre productos (22 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (41 páginas), Boletín de asistencia sobre productos (34 páginas), Boletín de asistencia sobre productos (38 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (15 páginas), Boletín de asistencia sobre productos (22 páginas), Configuración rápida (2 páginas)

Imprimir página
Epson 745c - PowerLite XGA LCD Projector Manual
E p s o n P o w e r L it e 7 4 5 c P r o je c t o r
Controlling Your Projectors
The control buttons in the upper-right of the EMP Monitor
screen let you turn the projectors on and off and select video
signals. (Hold the mouse pointer over a button to see a
description of its meaning.) Select the projector you want to
operate (with the mouse pointer) before clicking one of the
buttons.
If you need the most current status information about your
projectors, click the
Refresh
Note:
To turn on a projector when it's in standby mode (plugged in but
not projecting), first select
Network ON
setting in the projector's Extended menu.
Configuring the Monitoring Interval
You can select how often EMP Monitor checks the
projector status:
1. From the Tool menu, select
screen.
Note:
If you want EMP Monitor to run whenever you start your
computer, click
Add to Startup
2. Select the desired update interval and click
20
Epson PowerLite 745c Projector
-
Control buttons
button.
as the
Standby Mode
. You see this
Configuration
.
.
OK
Understanding the Notification Messages
If a projector experiences a problem, it can send an e-mail
message to each of the addresses you provided using EMP
NetworkManager. The message includes the heading "Epson
Projector" in the subject line. The body of the message
contains the name of the projector, the projector's IP address,
and a description of the problem. The problem descriptions
are similar to the errors reported by EMP Monitor listed on
page 19.
If a plus (+) sign appears before the description, it indicates
that a problem has occurred. A minus (–) sign appears when
the problem is resolved.
Note:
If a projector develops a critical problem, it may not be possible for
it to report the error.

Projector Status Lights

The lights on top of the projector indicate the projector's status
and let you know when a problem occurs.
Power light
Lamp light
Temperature
light
Power
Lamp
Temperature
light
light
light
Flashing
Off
Off
green
Green
Off
Off
Flashing
Off
Off
orange
Red
Flashing
Flashing red
red
Red
Off
Flashing red
8/04
Description
The projector is warming up.
Wait for the image to appear.
The projector is operating
normally.
The projector is cooling
down. Wait for the light to
stop flashing and remain
orange before unplugging it.
There is an internal error in
the projector. Turn off the
projector and unplug it.
Contact Epson for help.
There is a problem with the
fan or a sensor. Turn off the
projector and unplug it.
Contact Epson for help.