Cisco 6961 - Unified IP Phone Standard VoIP Manual de administración - Página 16

Navegue en línea o descargue pdf Manual de administración para Teléfono IP Cisco 6961 - Unified IP Phone Standard VoIP. Cisco 6961 - Unified IP Phone Standard VoIP 19 páginas. Unified communications manager express
También para Cisco 6961 - Unified IP Phone Standard VoIP: Ficha de datos (5 páginas), Notas de publicación (18 páginas), Ficha de datos (5 páginas), Manual del usuario (38 páginas), Manual de administración (14 páginas), Manual de instalación (16 páginas), Características (29 páginas), Manual de referencia (4 páginas), Manual de uso (6 páginas), Tarjeta de referencia rápida (2 páginas), Manual de consulta rápida (2 páginas)

Imprimir página
Cisco 6961 - Unified IP Phone Standard VoIP Manual de administración
802.1X Authentication and Status
Option
EAP-MD5
Transaction Status

Set Device Authentication Field

Procedure
Step 1
Choose Applications > Admin Settings > Security Config > 802.1X Authentication > Device
Authentication.
Step 2
Press Edit.
Step 3
Set the Device Authentication option to Enabled or Disabled.
Step 4
Press Save.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications
Manager 10.0 (SCCP and SIP)
16
Description
Device ID: A derivative of the phone
model number and unique MAC
address displayed in this format:
CP-<model>-SEP-<MAC>
Shared Secret: Choose a password to
use on the phone and on the
authentication server. The password
must be between 6 and 32 characters,
consisting of any combination of
numbers or letters.
If you disable 802.1X
Note
authentication or perform a
factory reset of the phone, the
shared secret is deleted.
Realm: Indicates the user network
domain, always set as Network.
Displays the transaction status of your
802.1X Authentication.
Cisco Unified IP Phone Settings
To Change
Display only. Cannot configure.
Set EAP-MD5 Shared Secret Field, on
page 17
Display only. Cannot configure.
To view the transaction status of your
802.1X Authentication, choose
Applications > Admin Settings > Security
Configuration > 802.1X Authentication
Status.