Siemens CM656GB 1 Series Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Horno Siemens CM656GB 1 Series. Siemens CM656GB 1 Series 44 páginas.
También para Siemens CM656GB 1 Series: Manual del usuario e instrucciones de instalación (44 páginas)

Imprimir página
en Rapid heating
Change any further settings depending on the selec-
tion.
Press
to start.
4.
8.6 Setting the type of heating and the
temperature
When you switch on the appliance, the types of heating
operating mode is set automatically.
Turn the rotary selector to select the required type
1.
of heating.
Press the temperature.
2.
Use the rotary selector to set the temperature.
3.
Press
to start the operation.
4.
a The appliance starts heating.
a The set type of heating, temperature and cooking
time/appliance run time are shown in the display.
When the food is ready, press
5.
appliance off.
Tip: The most suitable type of heating for your food
can be found in the type of heating description.
Note: You can also set a cooking time and an opera-
tion end time on the appliance.
→ "Time-setting options", Page 14
9  Rapid heating
To save time, you can shorten the preheating time for
set temperatures of 100 °C and higher.
You can use rapid heating for this type of heating:
¡ 4D hot air
¡ Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
10  Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
10.1 Overview of the time-setting options
You can set a cooking time and an operation end time
on the appliance. The timer runs independently of the
appliance during the operation.
Time-setting
Use
option
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance.
14
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1.
2.
3.
a The corresponding recommended temperature ap-
Changing the temperature
Once the operation has started, you can change the
temperature directly.
▶
a The temperature is applied immediately.
8.7 Displaying information
to switch the
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
▶
a When available, information is displayed for a few
1.
2.
a The
a The progress line begins to fill up.
a When rapid heating has come to an end, a signal
3.
4.
Cancelling rapid heating
▶
a The
Time-setting
option
Cooking time
End time
Press
to pause operation.
Press the type of heating.
Turn the rotary selector to select the required type
of heating.
pears on the display.
Use the rotary selector to change the temperature.
Press
⁠ .
seconds.
Set a suitable type of heating and a temperature of
at least 100 °C.
Press
⁠ .
symbol appears on the left of the display
next to the temperature.
tone sounds. The
symbol disappears from the
display.
Place the food in the cooking compartment.
Press
⁠ .
symbol disappears from the display.
Use
If you set a cooking time, the appli-
ance will stop heating automatically
once this time has elapsed.
Along with the cooking time (dura-
tion), you can set the time at which
you want cooking to end. The appli-
ance starts up automatically so that it
finishes cooking at the required time.