Epson 826W - PowerLite WXGA LCD Projector Configuración rápida - Página 3

Imprimir página

Epson 826W - PowerLite WXGA LCD Projector Configuración rápida

Network configuration

If you need to configure the projector for your network, you can use the

projector's menu system.

NOTE: If you're using the optional Wireless 802.11a/b/g Module, see the

User's Guide on your projector CD for configuration instructions.

Press the Menu button on the remote control, select the Network

menu, then press Enter.

Choose Network Configuration and press Enter.

Select the Wired LAN menu and press Enter.

Choose IP Settings and press Enter. You see a screen like the

following:

Do one of the following:

•

If your network assigns addresses automatically, turn on the DHCP

setting.

•

If your network does not assign addresses automatically, turn off

DHCP and enter the projector's IP Address, Subnet Mask, and

Gateway Address, as needed.

To enter numbers, use the

highlight the number you want to input, then press the Enter button.

When you're finished entering an address in the network menu, press

the Esc button to return to the previous menu.

To prevent the IP address from appearing on the standby screen, set the

IP Address Display setting to Off.

When you're done making all necessary changes, press the Esc button

to return to the previous menu, select Complete, and press the Enter

button to save your settings. Then press Enter again to confirm.

Press the Menu button to exit the menu system.

buttons on the remote control to

Project over the network

Install EasyMP

Network Projection and EasyMP Monitor (Windows only) on

each computer that will project over the network. Use the CD labeled Epson

Projector Software for Meeting & Monitoring to install the software.

If you need to configure the projector for your network, see "Network

Configuration."

Press the LAN button on the remote control.

Start EasyMP Network Projection on your computer.

Windows: Select

or Start > Programs or All Programs > EPSON

Projector > EasyMP Network Projection > EasyMP Network

Projection V2.XX.

Mac OS X: Double-click the EasyMP Network Projection icon in your

Applications folder.

Select Advanced Connection Mode and click OK.

Select the projector you want to connect to, then click Connect.

If you don't see the projector you want, click the Automatic search

button. If you still don't see the projector, click the Manual Search

button and enter the projector's IP address.

If you see a message asking for a keyword, enter the four digits that

appear on the LAN standby screen and click OK.

Your computer image is projected, with a floating toolbar:

When you're done presenting, click Disconnect on the toolbar.

NOTE: Using the optional Wireless 802.11a/b/g Module, you can project

wirelessly. To purchase the Wireless 802.11a/b/g Module or other

accessories, see "Optional Accessories." For more information about using

the projector on a network, see your User's Guide and EasyMP Network

Projection Operation Guide on your projector CD.