Epson 835p - PowerLite XGA LCD Projector Información sobre el producto - Página 17

Imprimir página

Epson 835p - PowerLite XGA LCD Projector Información sobre el producto

6. Click the projector you want to connect to and click the

button. If more than one projector is listed, you

Connect

can select additional projectors and connect to them at the

same time.

7. If you are prompted for a keyword, enter the four-digit

number displayed on the EasyMP Network screen and click

The computer's image is transmitted to the projector and

appears on the screen.

Switching Between Users

To connect to the projector while another person is already

using it (Access Point mode only), follow these steps.

1. Start NS Connection. You see this screen:

Select projector

2. Select the projector you want to use and click

You see this message:

3. Click

to connect.

Yes

The other user is automatically disconnected and notified

about the interruption:

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

Use a canister of compressed air to remove dust.

To remove dirt or smears on the lens, use lens-cleaning paper.

If necessary, moisten a soft cloth with lens cleaner and gently

wipe the lens surface.

Caution: Do not use glass cleaner to clean the lens.

Cleaning the Projector

Before you clean the case, first turn off the projector and

unplug the power cord.

To remove dirt or dust, wipe the case with a soft, dry,

lint-free cloth.

To remove stubborn dirt or stains, moisten a soft cloth with

water and a mild detergent. Then wipe the case.

Caution: Do not use wax, alcohol, benzene, paint thinner, or

other chemical detergents. These can damage the case.

Cleaning the Air Filters and Vents

Clean the air filters and air intake vents after every 100 hours

of use. If they are not cleaned periodically, they can become

clogged with dust, preventing proper ventilation. This can

cause overheating and damage the projector.

Note: To order replacement air filters, request part number

Connect

V13H134A07.

Follow these steps:

1. Turn off the projector. Wait for the

flashing, then unplug the power cord.

2. To clean the intake vents, use a small vacuum cleaner

designed for computers and other office equipment. If you

don't have one, gently clean the vents with a soft brush

(such as an artist's paintbrush).

10/04

Epson PowerLite 835p

light to stop

Power

Epson PowerLite 835p